============================================================
FIBERCAD DESIGN VALIDATION REPORT
============================================================

Result: PASS

DESIGN STATISTICS
----------------------------------------
  Avg Homes Per Group: 27.8
  Boundary Groups: 16
  Handholes: 71
  Splitters 1X4: 112
  Splitters 1X8: 16
  Total Addresses: 445
  Total Conduit Ft: 15496.4
  Violations Count: 0
  Warnings Count: 41

ERRORS (0)
----------------------------------------
  None.

WARNINGS (41)
----------------------------------------
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-01' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-02' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-03' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-04' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-05' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-06' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-07' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-08' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-09' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-10' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-11' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-12' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-13' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-14' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-15' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-13.1-SPARE-PORTS] Splitter 'spl-1x8-BG-16' (1x8) has only 1 spare port(s) (Lumos planning standard: ~4 spare per 1x8).
    Note: Reserve approximately 4 ports on each 1x8 splitter per Lumos planning standard. Reassign drops to another splitter if capacity allows.
  [LUMOS-18-BEND-RULE] Bend at hh-068: both adjacent segments exceed 150ft (275ft, 275ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-069: both adjacent segments exceed 150ft (284ft, 284ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-012: both adjacent segments exceed 150ft (431ft, 464ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-039: both adjacent segments exceed 150ft (153ft, 287ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-052: both adjacent segments exceed 150ft (218ft, 235ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-056: both adjacent segments exceed 150ft (235ft, 395ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-053: both adjacent segments exceed 150ft (265ft, 223ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-055: both adjacent segments exceed 150ft (185ft, 302ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-054: both adjacent segments exceed 150ft (235ft, 328ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-036: both adjacent segments exceed 150ft (333ft, 354ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-033: both adjacent segments exceed 150ft (354ft, 348ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-018: both adjacent segments exceed 150ft (446ft, 433ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-070: both adjacent segments exceed 150ft (260ft, 260ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-18-BEND-RULE] Bend at hh-071: both adjacent segments exceed 150ft (363ft, 363ft)
    Note: Place a handhole or flowerpot at this bend, or shorten one adjacent segment to ≤150ft
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-011 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-016 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-024 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-025 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-030 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-042 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-043 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-045 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-047 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-057 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes
  [LUMOS-12-HH-SIZING-3WAY] Handhole hh-059 is a three-way splice but is SPLT (recommend SM or MED)
    Note: Three-way splices should use SM (17x24) or larger handholes

============================================================